The threat from potato late blight increases during the growing season. As harvest approaches, it becomes ever more difficult to keep blight out of the canopy and prevent it reaching maturing tubers.

That’s why most growers switch to fungicides known to be strongly effective against tuber blight at the later stage of programmes.

Start protection sooner

It’s vital to safeguard your potatoes from the moment they are vulnerable – the tuber initiation stage.

What’s less well known is that tubers are at risk from the moment of tuber initiation which can be as early in the crop’s life as two to three weeks after emergence. That’s a long way from harvest.

The fact is that starting to build in tuber protection during rapid canopy growth and continuing to do so through the stable canopy phase pays dividends at harvest and on into storage.

Why Ranman Top

Ranman Top is the UK’s leading potato fungicide.

It has EuroBlight ‘premier league’ ratings for control of foliar and tuber blight, and for 14 years has delivered robust performance against the ever-changing UK blight population as fitter and more aggressive strains have arisen.

Often, catchy summer weather or the need to irrigate tips the balance of blight risk into high. That’s where Ranman Top is so valuable, with excellent rainfastness making it the ideal choice in these conditions.

And with six permitted applications it has all the flexibility for use in alternation with other products from the moment of tuber initiation through to the end of canopy removal.

Mode of action

First and foremost, Ranman Top is a protectant fungicide. Incorporating it into programmes from tuber initiation helps prevent foliar blight getting into the crop in the first place and becoming a source of infection for tubers later. Furthermore, it controls both the direct and indirect germination routes of the pathogen’s life cycle as illustrated below.

The asexual life cycle of Phytophera infestans that causes late blight disease of potatoes

When sporangia are carried into the crop on the wind, the protective fungicide layer prevents the direct germination of sporangia on the leaf surface, which occurs under warmer conditions (when temperature exceeds 18˚C). And when temperatures fall below 18˚C to levels conducive to indirect germination, causing sporangia to produce and release motile zoospores, Ranman Top prevents the resulting cysts from germinating and penetrating the leaf surface.

The source of infection to tubers is sporangia and/or zoospores being washed off leaves and down through the soil, so it’s the fungicide’s ability to block both germination routes that is critical in prevention of tuber blight.

At the end of the season when the canopy is senescing or haulm has been desiccated or mechanically removed, leaving the soil exposed with ridges cracking, sporangia and/or zoospores can have an unhindered route down to tubers.

At this stage, applications of Ranman Top can reach the soil surface where the fungicide forms a highly effective protective layer to prevent infection reaching tubers.







When and how to apply

The active substance in Ranman Top is cyazofamid, a QiI (Quinone inside Inhibitor) belonging to FRAC group 21 – one of just three FRAC groups known to be strongly effective against tuber blight.

FRAC code + group Active substances Products containing:
21. QiI Amisulbrom Shinkon or Gachinko as ‘agronomy partner’ to oxathiapiprolin in Zorvec Enicade
Cyazofamid Ranman Top
29. Uncouplers of oxidative phosphorylation Fluazinam Shirlan and others
43. Benzamides Fluopicolide Infinito

The prevention of tuber blight requires careful planning to deploy these few products throughout the programme while saving sufficient sprays for the end of the season in the run up to harvest.

The key is to use Ranman Top preventatively from tuber initiation.

This occurs after the ‘hook’ or ‘parrot/swelling’ stage when the rhizome tip enlarges and becomes spherical. It’s also defined as being at BBCH 40 – ‘swelling of first stolon tips to twice the diameter of subtending stolon’.

Tuber development – rhizome stages: ‘Hook’ – ‘Parrot/swelling’ – ‘Tuber initiation’

Important information on the use of Ranman Top:

  • Ranman Top is a protectant fungicide: apply before blight enters the crop
  • Maximum individual dose: 0.5 L/ha
  • Maximum number of treatments per crop: 6
  • Latest time of application: 7 days before harvest

Fungicide resistance: always plan and implement blight control programmes according to FRAG-UK guidelines.

Tank mixing: Certis Belchim support use of Ranman Top in mixture with blight fungicides Cymbal, Drum, Kunshi, Shirlan, Sympro and desiccants Gozai, Albis and Kabuki.

General guidance:

Rapid canopy growth – Use products that protect new growth. Tuber blight activity important from tuber initiation

Stable canopy stage – Use products with good rainfastness if irrigating or in ‘catchy’ weather

Senescence and desiccation – Protect throughout desiccation

Eight burning blight control questions: answered

Across Europe, it’s becoming more challenging to control late blight, with more aggressive strains holding dominance.

Monitoring of the Phytopthora infestans genotypes causing late blight outbreaks in Great Britain’s potato crops is conducted by Dundee-based James Hutton Institute (JHI).

Its researchers isolated some 453 genotypes in 2022 from samples sent in by a network of blight scouts across the country. Fig. 1 shows the results.

Fig. 1 – 2022 GB P. infestans population change

Source: James Hutton Institute

It reveals that 13_A2 and the fluazinam-insensitive 37_A2 have all but disappeared, with the population now dominated by 36_A2 at 53% and 6_A1 at 35%.

England had the highest proportion of 36_A2 at 67% and 37_A2 disappeared in Wales from 41% in 2021, while 6_A1 continued to dominate in Scotland.

The 41_A2 genotype, which was found for the first time in Fife the previous year, was not found again.

Certis Belchim has undertaken work to learn more about the fitness of recently established and emerging strains at its Londerzeel trials station in Belgium.

Results have shown the latent period of 36_A2, which now dominates in GB, is almost one day shorter than 6_A1 at 18C and 24C.

Growth (cm2/day) and sporulation capacity (spores/cm2) of 36_A2 lesions at the lower temperature of 10˚C are more than five times that of 6_A1.

With faster-growing lesions and huge sporulation capacity, even at lower, less “blighty” temperatures, growers cannot afford to take any risks.

Maintaining protection with appropriate fungicide choice and spray intervals is crucial to avoid outbreaks that can spread rapidly.

A genotype known as 43_A1 is insensitive to carboxylic acid amide (CAA) fungicides and has spread from Denmark, where it was first discovered, to the Netherlands and Belgium in recent seasons.

Although the clone has not yet been discovered in GB, experts believe it is only a matter of time before it jumps across the Channel.

There is also the threat of other aggressive or fungicide-insensitive genotypes from the “Other” category in sampling.

This category comprises genetically diverse late blight isolates from oospores created by sexual reproduction between two mating genotypes and is what drives population change over time.

Growers and agronomists need to be aware of the potential implications of known and unknown genotypes for fungicide use and take a pragmatic approach to late blight control in 2023 and beyond.

For both efficacy and resistance management, growers should always avoid applying blocks of the same mode of action and always mix modes of action in each spray.

Growers should leave little to chance, particularly in relation to inoculum sources, and use preventative fungicide programmes to limit epidemics.

This means halting the proliferation of volunteers, which can be poorly controlled in other crops, stubbles and at potato field edges beyond the reach of the sprayer boom.

Members of organisations such as the Association of Independent Potato Consultants (AIPC) are increasingly finding late blight on hairy nightshade (Solanum sarrachoides), which should be controlled.

Volunteer potatoes in cover crops are a worrying problem that threatens the uptake of “regenerative farming” where potatoes are grown.

Cull piles also need to be managed, either by covering them with sheeting or spraying off any new growth with glyphosate.

With aggressive late blight strains and the threat of insensitive isolates, resistance management should be front of mind.

Growers should adhere to tight intervals between sprays to maintain a protective covering within the crop canopy, particularly on new growth.

In 2006-07, growers stopped using phenylamide fungicides like metalaxyl-M when 13_A2 became prevalent and, more recently, fluazinam use dropped after the discovery of 37_A2.

Both genotypes have almost disappeared from GB populations and because these two active substances are effective against 36_A2 and 6_A1, they can now again play a valuable role in late blight control.

Using these alternative modes of action will help manage resistance to other fungicide groups and help reduce the risk of insensitive genotypes becoming established in the GB population.

Shirlan (fluazinam), which is effective at controlling zoospores, brings back another useful tool against tuber blight.

Growers previously had access to just two fungicide groups – QiIs like cyazofamid and amisulbrom, and the benzamide active fluopicolide.

Fluazinam products like Shirlan will help reintroduce a third mode of action, Group C5 (uncouplers of oxidative phosphorylation), into tuber blight sprays. Mixed with a suitable partner, Shirlan works with QiIs like Ranman Top (cyazofamid), which is an important bedrock of tuber blight control.

Furthermore, Shirlan is a useful tool at flowering as it provides activity against Sclerotinia, Botrytis and Alternaria.

Earlier than many growers may think. As soon as tubers initiate, tuber blight infection can occur, so it is essential to use products that protect against sporangia and zoospore, the late blight spores that cause tuber blight, activity early, rather than waiting until the end of the season.

Key tuber blight products like Ranman Top can be used early on, or later in programmes.

Actives like cymoxanil, or cymoxanil + propamocarb in higher pressure situations, are effective partners, combining the curative kick-back of Cymbal (cymoxanil) with the protectant nature of Ranman Top (cyazofamid).

Shirlan is a cost-effective option with zoospore activity for use early in the programme and again, cymoxanil, mancozeb, or stronger chemistry, are suitable partners.

Shirlan is also suitable in green-top crops later in the season, but is not supported in the last three sprays of stored crops. Ranman Top is the main alternative option here.

Burn patches of infected crop out immediately and treat surrounding crops quickly with the best chemistry available, as once blight gets established it is extremely difficult to stop, especially with aggressive genotypes like 36_A2.

This could involve an application of fluopicolide + propamocarb hydrochloride followed within three days using another robust product such as benthiavalicarb + oxathiapiprolin.

Learn more

We’ve plenty of ways to help:

  • Talk to your advisor or distributor.
  • Read key Ranman Top, Cymbal or Gozai details.
  • Contact our technical experts on 0845 373 0305 or send us this quick form.